Vehicle graphics and wrap care information:
We are confident that our product will serve you well but if there any issues, please let us know as soon as possible.
To ensure the longevity of our product, below is our vehicle graphics or wrap care information:
After the initial installation of your graphics or wrap it is best NOT to clean the vehicle for around two weeks as it takes a little while for the adhesive to harden and go off. If you do need to clean it within this time frame be very gentle and do not to use any cloth or sponge which may catch an edge of the film. DO NOT use a car wash or pressure washing equipment. Here are a few tips to keep your vinyl film looking new:
Wash regularly: Wash whenever the vehicle appears dirty. Contaminants allowed to remain on the vehicle may be more difficult to remove during cleaning. Rinse off as much dirt and grit as possible with a spray of water.
Difficult contaminants, for spot cleaning bird droppings, tar, etc. Use a wet, non-abrasive detergent and a soft, clean cloth or sponge. Rinse thoroughly with clean water. To reduce water spotting, immediately use a silicone squeegee to remove water and finish with a clean microfiber cloth.
Car washes: We DO NOT recommend using Brush-type car washes as they can abrade the film and cause edges to lift or chip, as well as dulling the film's appearance.
Pressure washing: We DO NOT recommend using a pressure wash of any kind. These machines when incorrectly used can take paint off so common sense must be used when it comes to cleaning the soft self-adhesive films used for graphics and wrapping.
Fuel spills: Wipe off immediately to avoid degrading the vinyl and adhesive. Then wash, rinse and dry as in Item as soon as possible.
Store under cover whenever possible: Wrap films and graphics (just like paint) are degraded by prolonged exposure to sun and atmospheric pollutants, particularly on the horizontal surfaces such as bonnet, boot lid and roof.
DO NOT use any abrasives or cutting compounds
DO NOT use rough scrubbing or abrasive tools, which will scratch the film.
DO NOT use any polishing or wax products on matte or textured films
Vinyl graphics, signage and wrap warranty policy:
This warranty statement applies exclusively to products manufactured and installed by Blue Lizard Signs Ltd.
Blue Lizard Signs Ltd offers a twelve-month in-house warranty on all vehicle graphics, signage and vehicle wrap products. Our warranty covers all defects in materials and installation. This includes full replacement of failed materials, removal, and installation. This warranty does not cover damage to the graphics, signage or wrap from negligence, misuse, accidents, road damage, wear and tear, vandalism, or any failure not a product of installation or materials. This warranty does not cover warrantable failures due to pre-existing damage to vehicles or substrates. All claims must be made within the twelve-month warranty time frame and are subject to approval by a Blue Lizard Signs Ltd director. In case of a warrantable failure, Blue Lizard Signs Ltd.’s responsibility is limited solely to, at its option, repairing or replacing the defective graphics, signage, wrap or parts of the wrap. Customer’s option for repair of warrantable failures is strictly limited to repair at Blue Lizard Signs Ltd. Materials used in warranty repairs will carry the same warranty coverage as the materials they replace, but the expiration dates will be the same as those of the original materials. This warranty is the sole warranty made by Blue Lizard Signs Ltd regarding our vehicle graphics, signage and wrap products. Blue Lizard Signs Ltd makes no other warranties, expressed or implied. Manufacture warranties may be available but are subject to stringent clauses including and not limited to applying to new vehicles only. The greatest of care is taken during the installation and/or removal of existing vinyl graphics/wrapping film/paint protection film Blue Lizard Signs Ltd will not accept responsibility for any damage caused due to substandard paintwork.